[T8A] TCP/IP layered elevator controller

P_INTRO

1, control layer 8, TCP/IP network management
2, hierarchical control management, manual layer selection or automatic layer selection
3. Set the user card usage period and time period
4, real-time monitoring of credit card record prompts
5, can remotely enable or disable control
6, visitor building linkage function, visitors no card to take the ladder
7. Automatically stop swiping control under fire condition
8, access control ladder management software V8.22 version

Description Specifications

01. TCP/IP communication mode can connect WG26/34 readers externally, with a user capacity of 5000 and real-time authorization management for users.

02. Offline wiring free management, unlimited user capacity, external dedicated RS485 read and write head, authorized by the management center for use.

03. Card swiping button mode: Card swiping can only be done on authorized floors, and with a visitor protocol converter, it can be linked with intercom visitors.

04. Direct card swiping mode: single-layer cards automatically light up floors, multi-layer cards authorize all floors to manually select floors (4-core button elevator with independent public lines, visitor linkage not allowed)

05. Automatic stop card swiping control for power outage or fire signal input, and remote computer start stop card swiping control.

06. It is possible to set the controller, floor number, validity period, fee amount (supported by card writing), time limit and other functions for user card access.

07. The system can manage 448 access control and elevator control devices in a unified manner, and can offline manage IC card sectors 1-15 for arbitrary selection and use.

08. The motherboard can control 8 layers and can add 3 expansion boards, with a maximum control of 64 layers.

09. Reporting the loss of user cards that can be lost and performing an unreport operation on user cards that have already been reported.

10. Using an IC elevator specific 485 format card reader, the traffic quality is stable and the distance from the motherboard can reach 1200 meters.

11. There are 10000 blacklists and 100000 offline card swiping records stored.

12. The dial switch sets the controller address, allowing users to freely authorize the use of multiple elevators or a single elevator.

13. Can extract card swiping records, set the working parameters of the controller, clock, remotely control the opening of floors, real-time monitoring, and report lost/disconnected user cards.

14. The output signal is a normally open and normally closed relay dry node signal, which is isolated from the elevator system and does not affect each other. The relay action time can be set from 1 to 255 seconds.

15. Multiple report query and printing functions such as user record reports, card issuance record forms, card extension record forms, temporary payment record forms, card swiping record forms, etc. Export to Excel

16. Industrial grade product settings, overvoltage protection, TVS protection, and isolation protection measures for both input and output. Low temperature resistance, adaptable to various harsh environments, and the external hardware watchdog circuit does not crash.

Extended functionality

1. Can have 1-2 external card readers simultaneously. Customizable card reader antenna can be led out to open a card swiping window for use.

2. Collaborate with protocol converters and building intercoms to achieve visitor functionality, enabling visitors to take elevators and interact with property owners.

Elevator motherboard installation and usage instructions

1. Elevator access control main control board installation: The main control board is generally installed on the top of the elevator car or behind the elevator button board. It is recommended to use a dedicated box for installing the top of the elevator car. According to different spaces, the motherboard and expansion board can be installed overlapping or separately connected, and the factory defaults to separate installation mode.

2. Installation of dedicated IC card elevator reading head: The card swiping reading head is generally installed inside the elevator car in a convenient position for card swiping.

1. Working voltage: DC12-24V
2, working current: < 500mA
3, working temperature: -30℃ to +60℃
4, motherboard size: 150*97*18mm
5, packaging size: 190*130*35mm
6. Packing list: 1 motherboard, 1 wiring manual, 1 meter /9 layer floor key line, 4 magnetic screws each, 1 protective bottom plate + protective panel each

P_KEYWORD

[T8A] TCP/IP layered elevator controller

P_INTRO

[QR26] Metal Integrated Vegan Reading Head

【 MS485 】 M4 Elevator Metal Integrated Reading Head

[HK2000] Non networked password access control machine

Contact Us